WYZE CAM (V3 & V4) 20° Window Mount
Description
***Concept*** A window mount for WYZE CAM V3 and V4 (Standard and Pro models supported) ***Usage*** You will need to print: - [1x] WYZE Cam V3 20 Angled Window Mount - [1x] WYZE Cam V3 20 Angled Window Mount Cap You will also need at least 2 small strips of double side tape for sticking the mount onto the window (optional if using the camera's built-in stand). To use: Pull out the camera stand slightly and slide the camera into the mount depending on what angle you want (20° up/down or left/right). Notice that there are only two ways you can fit the camera in, you can flip the camera's view in the WYZE app. Put the cap on first, and then connect power. ***Updates*** 2024.04.07 - Initial release. **NEW:** WYZE Cam V3 20 Angled Window Mount v10, WYZE Cam V3 20 Angled Window Mount Cap v3 ***History*** I was requested to make a window mount after seeing the cost for one from Amazon (such as this one: https://www.amazon.com/dp/B0C4H6XNVW). ***My Print Settings*** **Printer Brand:** Creality **Printer:** Ender 3 Pro **Rafts:** No **Supports:** Check part instructions **Resolution:** 0.12 ~ 0.28 **Infill:** 15% ~ 100% **Filament:** SUNLU PLA Black ***Notes*** **WYZE Cam V3 20 Angled Window Mount** - Print with the "window" flat on the bottom. Supports are required. **WYZE Cam V3 20 Angled Window Mount Cap** - Print with the flat side on the bottom. Supports are optional. The filenames are misleading, as it was originally designed for just the V3, but all V3 and V4 cameras can work.
Statistics
Likes
0
Downloads
0