Star Trek Enterprise Phaser Tweaked + Power Cell
Description
Combined multiple parts to have a better resulting print. Specifically the top, back, and muzzle pieces. Modified the top piece to have more space for the body to fit in as well as more space for the emitters to fit in the front of it. I also modified the top so it will use a ball joint-type hinge to the body instead of using a hole for filament/metal piece for the hinge - I have not tested this yet. If it doesn't work I can upload one with a hole in it to match the previous design. Also added a power cell model and associated coil (for printing different colors). Note: Scale z-axis (untick maintain proportions) for the grip strap pieces to 12 - 12.5mm range; the original part was too tall for me. Didn't mind it enough to want to rework it, but may if there is interest. Orientation: You will want to use the Auto-Orientation extension in cura for best results. For the top piece you will want the long flat vertical side to be 90deg relative to the print bed for best results (in my experience). Everything should use supports (I had good results with tree supports). Power cell coil seems like it will print better vertically on highest resolution with rafts on and using normal supports - need to verify.
Statistics
Likes
0
Downloads
0