Sunshine - Adjustable sleeve holder
Description
SUNSHINE Say hello to your new handy little friend "Sunshine"!!! Sunshine is a sleeve holder for the handy like no other!! It can be used with multiple different sleeves from the handy and others like fleshlight, such as the Vantage! For the first time ever, feel and control BOTH the constricting tightness AND expanding looseness of a sleeve to be just as you want it - This can be a tight enveloping feel or a soft slide all around you. This works with 2 pulling forcing around the circle of the sleeve holder - One squeezing the clam shell design closer for tightness and another, pulling to counter this and allow for a looser release and reinsertion of yourself. You can also configure the Sunshine sleeve holder in many different ways: So if you are thicker at the base or have girth for days or simply like a tight top end but wide entry, the Sunshine sleeve holder has 'gotchu' covered, exactly how you want it! Who doesn’t like a little Sunshine huh? Adjustments can be made before use or on the fly using small tabbed bungee cords or simply just rubber bands. These hook on to the ‘Pull close’ and ‘Pull loose’ main hooks on the sides of the clip-on part that is designed for the handy slider. From these hooks, a loop is made as you wish to the hinged panel that allows for multiple sizing of sleeves. * Please keep weight of sleeve below 500g to protect the handy motor from premature wear and failure. This combination of forces allow for the sleeve to be simultaneously held in yet let go to be suspended in between yet held on to the sleeve holder inner walls by small nubs that allow grip as well as a tougher sensation like finger tips, when using the thinner of sleeves like gen 1 or 2 from handy. This is adjustable to allow you feel how YOU want to feel. Enjoy! This design comes from a clever combination of my clip-on element for the handy slider and Bafangit’s “Handy sleeve adapter for stock sleeve” - https://www.thingiverse.com/thing:4840055 idea. I has a rounded 2 piece shell was utilized to have smoother sides and edges all around as well as shallower nubs for the inner walls. In addition to this, an awesome Handy community member – KBW27 came up with an idea to add elastic banding to allow for the clamshell design to be flexible in holding the sleeve yet accommodating all shapes and sizes as best as possible. KBW27 reached out to me initially about other ongoing designs but then this too, to which we began a journey together of designing and test printing to bring the Sunshine to where it is today. KBW27 will illustrate the evolution of the designs that took us weeks, days, hours, minutes and seconds to achieve this most unique feat. It was/is a real pleasure working together with KBW27 and we kept at it with sheer determination and grit to make this as best as possible even with practical and technical difficulties, we pulled through and pulled this off like a magic trick no one saw coming! More information to be added as and when possible… If you are left handed – Simply mirror the design in your 3d printer’s slicer settings and enjoy.
Statistics
Likes
0
Downloads
0