Blue Dog V3 : Unibody Quadcopter
Description
I Designed This Quadcopter With The Intention Of Making It Quicker To Assemble Than Other Diy Kits. Here Are The Features: Arms 4 Arms And Main Plate Form A Single Structure. No Need To Bolt The Arms And Main Plate Together. Arms Desgined For 3100Kv Motor With 5 Mm Shaft And M2 Screws Arms Have 2 Pairs Of Slots For Routing A Cable Tie. 40 Mm Max Width Of Arm To Accomodate Upto 6A Escs Arm Thickness Is 2 Mm Supported By A 5 Mm Wide And 10 Mm Thick Under Skirt. Skirt Adds Rigidity To The Arms While Also Acting As A Landing Gear With Wide Load Distribution. Main Plate 60 Mm Wide And 200 Mm Long Main Plate For Placing Micro Fpv Camera, Vtx, Fc, Rx And A 2S Battery In The Same Plane 18 M3 Holes Evenly Spread Across The Body For Mounting Accessories. Outer Holes Form A 30.5 Square For Mounting A Cc3D Board. Horizontal Slits For Rounting Wires And Velcros. Supported By 5Mm Wide And 10 Mm Thick Under Skirt. Adds Rigidity To The 2 Mm Thick Plate While Also Acting As A Landing Skid. Accessories: * 10 Degree Tilted Fpv Camera Mount * Tail For Adding An Rx Or Its Antenna Note That This Is Intended To Be A Not-Fast Quadcopter: Aimed At Fpv Beginners. My Goal Is To Create Something Like A Blade 180 Qx With The Power Of Brushless Motors. I Will Be Assembling This On My Own When The Print Is Ready.
Statistics
Likes
7
Downloads
0