Neptune 4 Wyze Camera Mount
Description
Mount for any Wyze Cam 1, 2, or 3 cameras to attach to 2040 v-slot (like what is equipped on the Elegoo Neptune 4 Plus/Max. The Neptune 4 is equipped with Klipper and a webcam can be installed/used through the Fluidd interface. However, I still use a Wyze cam on some of my other printers to check print status when I am away from home. This allows makes use of the magnetic design of the Wyze camera to make for an easily repositionable/removable setup. Hardware needed: QTY=1 M3 X 10 flathead screw QTY=1 M3 locknut QTY=1 M3 washer (optional) QTY=1 Wyze metal washer/magnetic base QTY=2 M4 T-slot nut QTY=2 M4 X 8 button head screws QTY=2 M4 washers (optional) QTY=1 tie strap (optional) Put the t-nuts in the 2040 slots, line up the M4 fasteners in the bracket and attach the bracket to the printer. Attach the Wyze oversize washer/magnetic base to the mount with the M3 flathead screw and nut. Washers can be used underneath the M4 screws and/or the M3 locknut if desired. Use the tie strap to pull back the power cord for the camera.
Statistics
Likes
0
Downloads
0