GWS Pico Tiger Moth 2204 Outrunner Mount
Description
This is a mount to use a 2204 outrunner on the original wooden stick that the brushed IPS geared motor mounted to. Keeps the prop in the same location as the IPS system, and should clear the stock cowl. You might need to trim the opening to clear the motor depending on the exact shape of the new motor, I only had to trim about 1/8" around the opening to clear. Depending on printer, you might need to drill the motor mount holes out, I had to clean them up with a 1/16" bit to make it easier to thread the motor mount screws in.
Statistics
Likes
0
Downloads
0