SSD1306 OLED display panel mount
Description
Panel mount for the 26x26 OLED display (SSD1306, 128x64, I2C). This design should snap into place when using a panel fo 3 to 4 mm thick. The minimum hole size is 28 x 27.5mm (tested with 3d printed panel). The display mount itself is 27.8 x 27.3mm. The display is mounted inside by friction. But you can additionaly melt the studs, that go through the screw holes on the PCB, to permanently fasten it into place.
Statistics
Likes
0
Downloads
0