Rekon 7 PRO LR arm protection landing pad, foot. For Fpv frame with reinforcement bar.
Description
This listing contains a protection landing pad/foot, for Rekon7 PRO LR fpv frame with reinforcement bars. It has a 31mm spacing from the base of the frame to the tip of the print (so it will distance the frame 31mm from the floor). The 4 holes are 3.78mm in diameter, and the screw i have used had a length of 19.5mm, flat head. (the thickness of the print from the screw head rest, to the carbon frame contact plane, is about 5mm). The weight of one print is roughly 13g without the supports, based on the estimation in prusaslicer. I used locktite to secure the screws so they won't come unloose.
Statistics
Likes
0
Downloads
0