Pot plant water connector
Description
Build an aquaponics system using normal plant pots using this pot water collector. The small water collector (25cm) can take pots up to 25cm diameter. The collector catches all the water draining through the bottom of the pot and channels it to the pipe connector fittings. The extra printed 15mm fittings can be used to connect 15mm diameter irrigation piping. The collectors can be fitted in series using the 8cm printed pipe or irrigation piping, the one end can be closed with the stopper. The collector can be placed on shelves or be hung on steel bars of up to 16mm diameter. The Large water collector take pots up to 45cm diameter. The extra printed fittings for 25mm pipes can be glued in place to connect to the return pipes. Several of these collectors can be connected in series. The collectors can be connected to 25mm irrigation piping, to one another with a 12cm printed pipe or one end can be closed with the stopper. The collectors can be placed on shelves or be hung on up to 20mm diameter steel or other sufficiently strong bars.
Statistics
Likes
0
Downloads
0