Sky-Watcher Telescope 9x50 Finder Scope Picatinny Rail
Description
Part is 52mm ID x 44mm tall, just enough rail to the front bolt of most reflex sights into a notch and hang off the back. You will also need something to increase the friction between the adapter and the finder scope body to keep it from spinning around (rubber bands, o-rings, double sided tape, etc), adapter includes a slot to put a zip tie through to tighten if needed. Part goes between the large end of the finder scope and the stock mount, remove the finder scope and o-ring, slide the adapter on, then reinstall the o-ring and finder scope.
Statistics
Likes
0
Downloads
1