Rostock Max V2 - Triple Strong Bed Clamp - No hardware needed!
Description
I Designed These Bed Clamps For The Romax V2 Based On The Stock Machine Profile, Including The 10Mm Bottom Mounting Plate --> Heater Plate Clearance, 7Mm Of Bed Clearance (Accommodates Buildtak On Top Of Glass), And A Beveled/Curved Edge To Match The 310Mm Glass/Heater Plate Itself. You Can Completely Replace The "Binder Clip" Clamps Using These, Or Augment The Binder Clips! They Press-Fit Right Next To The Extrusions And Include A Passage For The Belt To Fit Comfortably. They Offer Additional Clearance For The Screws Near The Tower Positions. The Clamps Themselves Can Be Removed As Easily As They Can Be Installed. I Designed Them Because I Wanted To Be Able To Press Very Forcefully With My Spatula When Lifting Prints Off The Bed. The Binder Clips Will Snap And Fly Away As You Press Against The Bed - Now The Bed And Heater Plate Are Securely Anchored In Any Direction Force Is Applied! Scrape Away Prints To Your Heart'S Content! ___ Iges & Autodesk Inventor Files Included! 5-16-16 Edit: I Added A Version That Is .79Mm Larger And Might Provide An Even Snugger Fit Against The Bed. Try Them Out! Might Work, Might Not...
Statistics
Likes
59
Downloads
0