AOS UL7 TPU Mounts | Air Unit O3 | TBS Crossfire Diversity | Beeper
Description
Hello there, i designed some TPU Mounts for differtent things. First the mount for the O3 Air Unit. You screw down the four seperate bottom parts with inserted brass sleeve. Watch out there is on for the side with the USB-C Port. The top part you just lay on the air unit and than put the frame together. I designed it rather slim so there is some airflow while flying next to the air unit. I desiged two antenna holders so that the two antennas are exactly in an angle of 90 degrees to each other. The side antenne is rotated 20 degrees so it is about 0 degrees while flying. The idee behinde this is explained on this page:https://team-blacksheep.freshdesk.com/support/solutions/articles/4000101963-antenna-orientation#:~:text=The%20receiver%20antenna%20of%20the,even%20on%20high%20bank%20angles.&text=For%20the%20Micro%20RX%20you,them%20in%20a%20straight%20line. The mount for the beeper is mounted on the standoffs has holes for camera cabels and beeper cable. Also some holes for air flow. The mount for GPS Unit: https://www.thingiverse.com/thing:6322526 Arm TPU Bumper: https://www.thingiverse.com/thing:5990198 TBS Crossfire Diversity Mount 30x30mm: https://www.thingiverse.com/thing:5341144 If you have any questions about this build let me know it in the comments.
Statistics
Likes
0
Downloads
0