CREALITY K1 ACTIVATED CHARCOAL AIR FILTER
Description
<h3>CREALITY K1 ACTIVATED CHARCOAL AIR FILTER</h3> <h2>FEATURES</h2> <ul> <li>Only 3 objects to print. <li>No supports needed. <li>Accepts 4mm Charcoal pellets OR Charcoal filter if you cut your own. <li>Snap press together, no glue needed <li>Cavity is roughly 57x60x19 if you want to cut to fit a charcoal filter pad. <li>Snug fit thanks to tabs with friction bulges. <li>Tight connection; air will flow though and not escape out the sides </ul> <h2><p>INSTRUCTIONS FOR ACTIVATED CHARCOAL PELLETS</h2></p> <ol> <li>Snap FILTER SCREEN on MAIN BODY <li>Fill with 4mm activated charcoal pellets <li>Cover with COVER LID <li>After filling, shake to settle pellets to make room for more. Air will flow fine through a full chamber of pellets. </ol> <h2><p>INSTRUCTIONS FOR ACTIVATED CHARCOAL FILTER PAD</h2></p> <ol> <li>Cut 60x60 square (you may add more than one square or fold over a 60x120) <li>Put filter pad into cavity of MAIN BODY (you can squish in the corners or round them off) <li>Snap FILTER SCREEN on MAIN BODY <li>Cover with COVER LID </ol>
Statistics
Likes
0
Downloads
0