CR-10 single 120mm fan with original feet
Description
I remixed replayreb's remix of tekblub's cr-10 control box base plate & legs for dual 120mm fans. Removed the rear 120mm fan. If you have longer bolts and nuts you can easily reuse the original feet by substituting the two front fan screws and just bolting the back two on. I ended up relacing the fan in the photo with a Noctua NF-P12 redux-900 powered right from the PSU 12V instead of the fan plug on the PSU. The 900 RPM Noctua has double the CFM of the stock 60mm fan. I opted to make a custom cover for the PSU with some thin gauge perforated metal from the big box store. Just cut out the size i need with tin snips and used a metal ruler to bend the sides over to make a pan the slips on top of the PSU.
Statistics
Likes
0
Downloads
0