Dual slim ODD frame for 5.25" Bay
Description
This is a frame for mounting two slim DVD/CD/BluRay drives in to standard 5.25" PC bay. Drive dimensions reference based on HP ODD PN: 659877-001, model DS-8A5LH. May fit to other ODD's from other manufacturers. Parts needed: 12x M2 5mm bolts 9x M3 6mm bolts 17x M4 nuts (h=2.4mm or h=1.8mm) Print: 2x odd_fc_button.stl 2x odd_fc_button_bracket.stl 2x odd_fc_hook_1.stl 2x odd_fc_hook_2.stl 2x odd_fc_hook_3.stl 2x odd_fc_hook_4.stl 2x odd_fc_led_diffuser.stl 2x odd_front_cover_short.stl or odd_front_cover_long.stl 1x odd_rear_bracket.stl 2x odd_side_bracket.stl 1x odd_side_bracket_add.stl (additional part, you may not need it) 1x dual_drive_front_panel.stl 1x dual_drive_side_panel_a.stl 1x dual_drive_side_panel_b.stl 2x dual_drive_top-bottom_panel.stl Assembly: For odd_fc_hook_1.stl use 3mm piece of 1.75mm filament, hook has hole for this. Button, button bracket and LED diffuser can be glued togeather, I used soldering iron for this. ODD front cover: press hooks in to their sockets, use flat screwdriver, image 1. Front & side panels: press M3 nuts in to their sockets, image 2, 3 & 4. Put parts togeather according to assembly image 5 & 6. Remarks: Because every drive is littlebit different, ther may be alignment problems. odd_side_bracket_add.stl will help to fix this problem. Also there is small cilindrical part on dual_drive_top-bottom_panel.stl that may need to be removed or cut shorter, depending on your drive. odd_front_cover_short.stl and odd_front_cover_long.stl width difference is 0.6mm Use 0.2mm or 0.1mm layer height. All parts are designed by 0.2mm step. 0.12/0.15/0.24mm etc layer height may produce problems when assembling. When using other model ODD, than mentioned above, you may need to change hook(s) dimensions.
Statistics
Likes
0
Downloads
0