v3 Reversible 3.5" Generic HDD Caddy
Description
<b>2.5"/3.5" SSD/HDD CADDY TRAY <u>Version 3</b></u> https://www.thingiverse.com/thing:6585223 All previous trays ARE compatible, but will still try to slide in too far. v3 Trays ARE NOT backwards compatible. CHANGES CADDY - Now the Caddy LATCHES and can't be pushed too far into the enclosure. - Individual Side Slides for 3.5" HDD has been added (Don't have to mirror them) - 2.5" SSD (x1) can be mounted directly to Caddy CADDY x3 SSD ADD-ON - UP TO 3 SSDs can be mounted to each caddy when using HDD to SSD Add-ons (About 2mm between each one if 3 mounted) <b>HARDWARE REQUIREMENTS</b> <u>HDD TO SSD ADD-ONS (x3 SSD)</u> - M3 by (6-10)mm For mounting to Caddy **** SUPPORT REQUIRED FOR <u>HDD-REVERSABLE-TRAYS & CADDY RAIL<b>ONLY</u></b>**** (SUPPORT ON BASEPLATE ONLY) - <I> ANY SUGGESTIONS?</I> WHEN PRINTING: - MINIMUM: Use 1.2MM+ thick walls on every side <u>- SUGGESTED 2.4MM+ EVERYWHERE</u> Used: Sketchup 2020
Statistics
Likes
0
Downloads
0