Large Moai Head Mold
Description
Original 3d image by "Scan The World" https://www.myminifactory.com/object/3d-print-moai-head-in-rano-raraku-easter-island-14215 This is a 23" tall 1.4mm thick shell of a Moai statue, designed to be printed as 3 parts using an Ender 3 or a printer of equivalent build volume. This mold is designed to produce a large concrete or resin casting. ------------------------------------------ Recommended print settings ------------------------------------------ Shell A: Wall line count = 6 Infill density = 15% Build plate adhesion type: none No supports Shell B: Wall line count = 6 Infill density = 15% Build plate adhesion type: none Supports: I recommend using a minimum support overhang angle of 85-degrees (touching print bed only) and using a support blocker for the nostrils. Shell C: This should be printed upside down. Wall line count = 6 Infill density = 15% Build plate adhesion type: none Supports: I recommend using a minimum support overhang angle of 10-degrees (touching print bed only) and using a support blocker for all but the first inch or so to provide adequate contact area with the print bed.
Statistics
Likes
0
Downloads
0