Toyota 1-Ton Dually Rear Hub Cap
Description
This is an improved replica of the 'National RV' (and alike) rear hubcaps that came with the Toyota 1-Ton dually in the 80s thru the early 90s. I've modeled this after the pretty broken one that came with one of my trucks (see picture). I've added some screw hole standoffs to hopefully keep it from failing in the way mine did, and also changed the dimensions slightly to make it fit better. This part should be printed in an heat and UV resistant filament like PETG, ABS, or most preferably, ASA. I printed mine face down to add texture to the face (and to avoid supports) but I suppose you could print face-up with supports to get better resolution in the embossed lettering. Use two stainless M8-1.25 x 25mm flat head or oval head screws to fasten them to the threaded holes in the rear hubs. I'm using non-stainless in my photos just for test fitting, as my hardware store didn't have stainless in that size. As of the time of uploading this design, I've literally just put the caps on my own truck, so they haven't been extensively tested yet, but I will definitely make updates if something goes wrong down the road. If you test this print on your own rig, please let me know if you find anything that can be improved! Here is a link to the Onshape file if anyone would like to modify or remix their own: https://cad.onshape.com/documents/1e592e0a9d9df7389b8794fb/w/9dd79ce1769f0e667f07b716/e/9f8e43e61c06041b69382768
Statistics
Likes
0
Downloads
0