Customizable Bike Light Mount
Description
##Summary This design was used to mount a rear bicycle light to the back of my bike, remixed from drxenocide's version. It is designed so that the light pressure fits/slides vertically into the slot. The mount has recesses and holes for zip ties (of customizable width) which attach the mount to the back of the rack (or whatever vertical flat surface you are mounting it to). The included STL was the one that worked for my Concord 24014 Rechargeable USB Rear Tail Light (https://www.walmart.com/ip/Concord-5-Lumens-USB-Rechargeable-Bicycle-Tail-Light-2-oz/1614592554), but this thing should be customizable to any of the slide-lock cycling couplers. Put any other requested features in the parent (drxenocide) thing ##Print Settings Rafts: No Supports: Either use a pocket knife to hold up the latch clip as it prints, or use a separate support, or include printed supports. Resolution: Fast/Low is fine Infill: 15% was fine Notes: Print with the slide hole on top/up so that you can print without supports/overhang errors. While the top of the ziptie recess fits a ziptie of that size exactly, the bottom recess gets a little squished, so either add 1mm to the ziptie width as tolerance, or just do a little post processing with a file or knife. ##Possible Future Features -Allow the slide slot to be rotated -Allow printing on a curve, for printing around bars -Different mounting options: holes, zipties, bolt options for bar clamping -Documentation inside the .scad file Put any other requested features in the parent (drxenocide) thing
Statistics
Likes
0
Downloads
0