VW Eurovan T4 IlLED Emblem Adapter
Description
This adapter accommodates a 12v illuminated emblem sold here: https://www.carledlogo.com/car-logo-badge/led-vw-emblem/ The adapter is based on Arnd_Hansson's star wars emblem. The star wars emblem is removed and the base is utilized to snap into the opening that accommodates the original OEM emblem. Print the base and curved adapter separately, and glue them together with a good quality plastic glue or epoxy (I used JB weld plastic cement). The LED logo has double-sided tape on the back. Clean the curved adapter and attach the back of the illuminated logo to it. There is a hole in the adapter to thread the wiring for the emblem. Connect the wires to a 12v source on your T4. The emblem is relatively low power so you can likely use a fuse tap for an ignition triggered circuit and run the wires through the firewall, into the engine compartment, and to the logo. Protect and secure the wiring so it does not interfere with the radiator, any moving parts underhood, etc.
Statistics
Likes
0
Downloads
0