Fanatec CSL DD Dashboard/Button Box
Description
This is a Dashboard/Button Box i designed for the Fanatec CSL DD. You need some things to build it. USB Joystick Encoder: https://amzn.eu/d/j2pzCxx Something like this. There are many of these around which are more or less the same. Just look out for something that has the same distance between the mounting holes on the PCB (W: 80mm H: 30mm). Also the kit that i used had a USB cable with a strain relief in it that i made a part of the back cover. So maybe look for the same kind of strain relief. Self tapping screws: https://amzn.eu/d/eIlZvHx I used this set. But probably any screws with a 2mm diameter and a coarse thread should do the job. The screws for the PCB should not be longer than 8mm! The Screws to attach the Back Cover should not be longer than 15mm! M6 Screws to attach the Plates to the Wheel Base. Maximum length 15mm! Now about the Switches and Buttons. You have 5x 12mm holes on the top of each plate and 2x 6mm Holes below that with some kind of twist protections that many switches have. So you can put anything that fits in there. I also used some Buttons with an LED ring where i got the 5V form the USB Joystick encoder. I used those Buttons: https://amzn.eu/d/4rUcso5 and those Flip Switches: https://amzn.eu/d/eaFzvxC
Statistics
Likes
0
Downloads
0