TRX4 ScattergunV2 90mm wide Laydown Servo Mount
Description
This is a laydown servo mount I made specifically for my TRX4 Sport build using the Proline Cliffhanger body. I'm using the ScattergunV2 chassis rails and the original BowHouse RC TRX-4 High Clearance Skid V2(non-narrow version) which is 90mm wide. I've repositioned the panhard mount inside the rails due to the added width of the skid plate and stuffed the 3BrothersRC G11 servo in the mount. Once the servo is fastened to the mount the entire piece is very solid. Clearance was made for a battery strap and the stock TRX4 transmission using a 550 size motor. DO NOT SELL OR REDISTRIBUTE MY WORK
Statistics
Likes
0
Downloads
2