Crown / Samducksa 309 Flat Jacket Octagonal Collar Restrictor Gate Thingy
Description
#Crown / Samducksa 309 Flat Jacket Octagonal Collar Restrictor Gate As the name implies, this is an octagonal collar for Crown/Samducksa 309 models. Tested on 309MJ but should fit any 309. Negative numbers at the end of the file names indicates how the gap (throw) was shortened and positive - enlarged. _Due to the fine measurements and printer precision settings, `0.5`mm differences might not be apparent. I suggest trying even numbers starting from `±0.0` first. Using `.stp` file format is also suggested due to abundance of round shapes, which are not ideal for `.stl` files_ ###Compatibility table (assuming default shaft size) | Delta (mm) | Actuator size(mm) | Fits | |:----------:|:-------------:|:------:| | +1.0 | 16.0 | ?? | | +1.0 | 16.2 | ?? | | +1.0 | 16.3 | ?? | | +0.5 | 16.0 | ?? | | +0.5 | 16.2 | ?? | | +0.5 | 16.3 | ?? | | ±0.0 | 16.0 | OK | | ±0.0 | 16.2 | OK | | ±0.0 | 16.3 | OK | | -0.5 | 16.0 | OK | | -0.5 | 16.2 | OK | | -0.5 | 16.3 | OK | | -1.0 | 16.0 | MEH | | -1.0 | 16.2 | OK | | -1.0 | 16.3 | OK | | -1.5 | 16.0 | ?? | | -1.5 | 16.2 | ?? | | -1.5 | 16.3 | ?? | | -1.8 | 16.0 | NO | | -1.8 | 16.2 | NO | | -1.8 | 16.3 | MEH | | -2.0 | 16.0 | ?? | | -2.0 | 16.2 | ?? | | -2.0 | 16.3 | ?? | Abbriviations: `??` - Not tested `OK` - works as intended: switch activates before gitting the gate `NO` - doesnt work: either switch is not activated or the gate is not reached when switch pushed all the way in `MEH` - works barely: either switch is barely activated after the gate is hit or gate is barely hit when switch pushed all the way in
Statistics
Likes
0
Downloads
0