Flipper Zero Rabbit Labs NRF24 Case
Description
This is a basic case for the Rabbit Labs hot-swappable NRF24 module, (two row pins). It has a lip to hold the lid up, and is held closed with three M3x4mm machine screws. The small vent in the top is intended to help with cooling since the chip can get a little warm if it operates for a while, (as opposed to the CC1101 cases I've done). This one is a little clunky, but a trio of screws in this arrangement works well to keep the case sturdy without making it too large or impacting fit. I make these for whatever hardware I have on hand at the given moment as far as machine screws go, so I may come out with more versions to fit different hardware.
Statistics
Likes
0
Downloads
0