2020 (20x20) I-Type slot 5 corner bracket

Description

I Am Currently Building The Awesome "Ultimaker 2 Aluminum Extrusion 3D Printer" Http://Www.Thingiverse.Com/Thing:811271 And Found The Uppermost X Bar Of The Bottom-Construction Could Tilt -> That Sounded Cryptic -> The Bar That Holds The Lower Part Of The Z-Stage: Z-Motor And The Lower Portion Of The Two 12Mm Rods. The Brackets Are 18X18X18Mm And Are Meant For M3 Counter-Sunk Screws. I Have Not Assembled All Of It Yet, And The Tilting Might Be A Passing Issue, When Everything Is Done.. I Decided To Forego Any Issues And Wanted To Mount Corner Brackets On All The Bottom-Upper-Joints (Hope That Make Sense, But See Photo). I Thought It Would Be Easy To Find Some Corner Brackets, But It Wasn'T (They Were Too Big Or Had Other Wrong Measurements For My Project), So I Just Designed Some Myself. I Used The Measurements From Motedis.De And Made 2 Different Models. One With Guides And One Without. They Work Exactly The Same, But The One With Guides Are A Bit Harder To Print, Unless You Have Good Cooling (I Don'T).

Statistics

Category

Tags