Zlin 143 Lsi fuel pump switch cap
Description
Designed a switch cap for Zlin 143 Lsi and used it for the fuel pump switch to save time inflight and reduce the distraction during the approaches. I have upladed different diameters as well in gcode, to make sure you can print it for different switch sizes. I have designed a whole on the top, to apply it tight, but the air can get out while installing and removing. Print it in YELLOW, as this color is the FUEL marking. Printing this item in different color might result misusage of airplane hardware, please use it on your own responsibility! OneShape link: https://cad.onshape.com/documents/4b28e14efef0cf200d34e3c1/w/4d3cc879f79f89561155267f/e/017a3c3809f6dce7b3773d62?renderMode=0&uiState=662f662c6fb99218b3a9c89b I did not use any BRIM to print, but it might be required depending on your bed adhesiveness. Enjoy!
Statistics
Likes
0
Downloads
0