Lead screw Z Axis Mount for KP3s
Description
For the modification to linear rails I used "https://www.thingiverse.com/thing:5384505". Thera are no problems, everything works perfect. Many thanks to LoZa. This remix shall bring the lead screw as parallel to the linear rails as possible. I did not install the T8 anti backlash screw. The Z-axis print height is still 180 mm. 10mm more would still be possible (see picture) BOM Spring D4x8mm 2x screw M3x35mm 1x screw M3x12mm
Statistics
Likes
0
Downloads
0