MPMD Monoprice Mini Delta E3D Revo Hotend Replacement
Description
I really like the design for the V6 hotend from evancli, but I wanted to install a Revo Micro. I ended up having to almost totally redesign it, but a big thanks to evancli for sharing his hard work. My changes: * Moved from E3D V6 to E3D Revo Micro hotend * Redesigned cooling a little (it still needs improvement - really it needs two directions and to be closer to the nozzle) * Since the Revo Micro is shorter, I had to twist the part cooling fan to make it all fit, and I had to angle the heatsink fan. * I added a baffle to block the heatsink fan flow from hitting the hotend * I changed the embedded nuts to holes for brass inserts - just a personal preference * I added a third mounting point to match the one that was originally on the machine One negative change that I made is the upper part now needs support... sorry. Mine is printed in carbon fiber ASA. The prototypes were in Sunlu PLA+ and worked fine, but I want to print higher temperature filaments.
Statistics
Likes
1
Downloads
1