Newport NK180/300 Handle
Description
This is an accessory for the Newport Vessels NK Throttle. The NK180 and the NK300 both come with a tiny throttle lever that is a bit inconvenient to use. The pictures above are printed in Carbon Fiber Polycarbonate(PCCF) and while the picture has my initials on the throttle, the STLs included have that removed. This part was designed to lightly slide over and use a M5 bolt and nut to secure it to the throttle. No modding needed. Although this part should be fine in any filament type i would NOT recommend PLA given the nature of this hobby. When Printing this part. Just place the Flat side down and use supports for the internal part that slides over the nk lever. No specific supports type of supports needed. Parts needed are: 1x M5 x 20mm Bolt 1x M5 Nut I will be doing a Limited amount of commissions for this item as well as my NK Base plate. Linked Here: https://www.thingiverse.com/thing:6604233 If interested just message me though thingiverse for a quote. I have tons of colors in ABS and black PCCF. I will also include the hardware needed to mount.
Statistics
Likes
0
Downloads
0