Mounting case for ESP32-CAM (+ESP32-CAM-MB board)
Description
This thing combines features from the two things it is a remix of. --- Here is an English translation of the description of [Der_Erbauer](https://www.thingiverse.com/der_erbauer)'s [thing](https://www.thingiverse.com/thing:5638294): > This housing is specially designed for the ESP32-CAM module with USB adapter shown. > The buttons on the USB adapter are not exposed. > The camera itself is housed in a 9x9x1mm recess in the housing, so that the focus can be adjusted from the outside. I chose the cutout for the USB connection cable so that a plug measuring 11.5x8mm can also be used. > The two ESP32 modules available to me fit into the housing without any play and are held securely in the housing by the tight-fitting cover. > Light effort is required to close or open the lid, which makes screwing or gluing unnecessary. This remix removes the clip-in flanges/tabs and associated recesses from that original to make it easier to print. The press fit is good enough without them. --- The tab on the bottom (mostly taken straight from [https://www.thingiverse.com/fuweissinger](fuweissinger)'s [thing](https://www.thingiverse.com/thing:5729097)) makes this case compatible with the popular [Ender 3 camera mounting system](https://www.thingiverse.com/thing:3294512) by [Codemonkey1973](https://www.thingiverse.com/codemonkey1973) (which was originally designed for a RPi camera).
Statistics
Likes
0
Downloads
0