DBD LED Logo sign RGB
Description
3D printed Logo design of a Pokeball. The Logo is made out of 3 pieces and several LED stripes that sit between the bottom parts. I used WS2812b, but you can also use standard 12V single color RGB Stripes. The pattern at the inside is made for 60led/m LED stripes. For the LEDs to work you need a small threewire Cable that connects for example to a WLED controller. The two bottom parts a held together by 16 M3x8 flathead screws and 16 M3 threaded inserts.
Statistics
Likes
0
Downloads
0