Filament Drybox
Description
Combined a bunch of others drybox designs to create my existing setup. List of Purchased Parts: 1. EZY Drybox 18L/19Qt from HomeDepot 2. Metal Rod 5/16 x 36'' for Filament Spools also from Home Depot. I have a fine thredded rod but a smooth one woould be ideal. 3. PTFE Connectors from AliExpress - Used a total of 9 PTFE connectors on my setup. 4. PTFE Tube from AliExpress - Got the 2m since its cheap. Only used a little less than a meter in total. 5. Humidity/Temp Sensor from AliExpress 6. M3 Hardware Hex Screw from Aliexpress - Got the M3 282 piece kit. - 20x M3 3x10 screws (All used for the filament guides on the drybox and on temp sensor on the drybox) - 6x M3 3x20 Screws (Used on sillica case, 3 screws each) - All screw used with M3 Hex nut 7. Fillamet Roll Bearings from AliExpress - 4x 608zz bearings for each roll, 16 total in drybox 8. Sillica Gel from AliExpress List of Printed Parts: 1. Lack_Guide_Top/Bottom - Remixed Rimbalin's filament guide to be able to screw PTFE connector into it - Printed QTY: 1 2. Bearing_Support - Used ReaperOfThresh's Bearing Support to better hold the spools in place while on the bearings - Printed QTY: 16 3. Roll_Base - Used nameek's Filament Base to hold the rods that the spools are placed on. - Printed QTY: 2 4. DryBox_Guide - Used Max Mustermann's filament guide to feed filament out of drybox and back in when roll is not in use. - Printed QTY: 16 5. I designed a rough silica case, which is what im still using. Biggest flaw is where the screw holes are. Haven't had time to redesign. - Printed QTY: 4 6. I designed the sensor holder - Printed QTY: 1 Print Printer: Prusa MK3S Fillament: Hatchbox Orange PLA Infill: 15% Supports: No
Statistics
Likes
0
Downloads
0