Qidi Q1 Pro Topplade
Description
This is a modified version printed in PLA+ and a 2mm nozzle. The parts are designed to raise the lid enough to prevent the PTFE tube from scratching it during printing. The parts must be printed twice. The tabs on the disc may need to be sanded down a bit to get a snug fit. I glued the front and back pieces together with superglue so that when I remove them I only have two pieces. There is a gap of 0.5 mm on the handles. If you don't want this gap, the STL file must be edited accordingly.
Statistics
Likes
0
Downloads
0