SHDS3 ODE Shell PC Engine
Description
Hello Fellow Makers. I got a Friend to design some parts for the SHDS3 ODE as the original blue case does not compliment the Grey CoreGrafx II well. Will have to be printed with supports. Both top and bottom parts have to be printed upside down. Screw bosses are a separate print as they will be very fragile if part of the top print, these can be glued in. Some superglue will need to be added to the screw hole plates on the base print to strengthen. Worked a lot on this with a friend so tolerances should be good. Feedback and Remixes welcome :-) 3D File Designed by Will (Not the Fresh Prince) Smith.
Statistics
Likes
0
Downloads
0