PS5 Controller Charging Caddy
Description
Needed a controller caddy/charging station that would fit into the storage bin of our recliner. Whipped this up. We have three players so made it for 3 controllers, but if folks want I could easily modify to be 2 controllers or 4 controllers. There is a hidden compartment in the back that holds a USB charger, and channels that allow the USB cables to go from the charger area to the controllers. I designed the compartment to fit this old Anker charger I had lying around (https://www.amazon.com/Anker-5-Port-Charger-PowerPort-iPhone/dp/B00VH958F0) but I'm there are others that fit. I used 1ft-long USB cables to run through the channels, but you can go longer if that's what you have on hand. I printed this all out of PLA. Some supports are required - I used organic support and they worked very nicely and removed easily. I also have a 1/4" hole running through the base of the handle and the top of the caddy to allow for a dowel to be slid through to secure it, but mine fit tightly enough that it wasn't necessary.
Statistics
Likes
0
Downloads
0