Kaif S2 Diffusor (Shisha, Hookah)
Description
## Dimensions Top inner hole (Diameter): 16mm Top outer hole (Diameter): 20mm Bottom inner hole (Diameter): 23.7mm Bottom outer hole (Diameter): 30mm Inner Screw: ``` Pitch: 1 mm Number of Starts: 1 # Turns Num Turns: 4 Lead in Pitches: 2 ``` Total height: 15.7mm ## Print suggestion I'd suggest you to print with a 0.15 layer height on a 0.4 nozzle. I printed it with Sunlu White PLA+. Also I flipped the model, used a brim and tree structure supports (see third image). Your milage may vary. ## About I provided a modifiable STEP file as well as the printable stl file. [Onshape Link](https://cad.onshape.com/documents/bfa2bc50d84860b9f5a4ce54/v/066ac97c4def754a0af57428/e/8c80771a5970656371a93333?renderMode=0&uiState=663cf218b9017e40bc305bdc) It works on my Ocean Hookah Kaif S2 without any issues. But I need to preface that this version is not optimal. I created this model in order to minimize the upshooting bubbles to prevent water in the hose (because I have a strong air draught). I already have started a V2 which you can preview on [onshape](https://cad.onshape.com/documents/bfa2bc50d84860b9f5a4ce54/w/4aa4f3178fbfc415b1f44140/e/8c80771a5970656371a93333), but the total height exceeds the bowl currently. In the future i will create a new thing here and edit this post after im done. At last I need to also say: This might or should be a temporary solution, since afaik PLA shouldn't be used in water. PLA or PETG are generally food-safe, but need a coating to prevent bacteria from forming in the gaps. Look into PLA or PETG on the Prusa Knowledge Base website.
Statistics
Likes
0
Downloads
0