Wind turbine Sci-fi terrain
Description
Wind turbine as terrain for your wargame. Can be used for both standard 28mm scale games and 1/285 scale games such as battletech. The wind turbine is available in two versions, stationary and rotating. To make a stationary version, just print and assemble two parts: "Rotor02_1" and "Base02_Solid". To make a rotating version you need to print the following parts: "Rotor02_1", "Base02_Rotating" and "Axis01". You will also need two size 608 bearings. You can use ready-made ones or print these, for example: https://www.thingiverse.com/thing:4628063 https://www.thingiverse.com/thing:4821342 The assembly sequence for the rotating version is as follows: -Place bearings on both sides of the axle; -Insert the axle with bearings into the rotor with the triangular end; -Install the resulting assembly into the base. All parts are printed without supports, with the exception of the rotor, which may need support in the hole for attaching the axle. I recommend painting the base and rotor prior to assembly.
Statistics
Likes
0
Downloads
0