Filament-roller for Anycubic i3 Mega S/Pro
Description
<h1>Filament-roller for Anycubic i3 Mega S/Pro</h1> <h2>Status: FINISHED</h2> This Thing includes an Upgrade to the standard filament-holder of the Anycubic i3 Mega S/Pro. To reduce tension on the filament and by that a reduced risk of breaking filament or extruder-failure i created this non destructive accessory. Get your own now to improve your printing quality! <br> <h2>How to build</h2> 1. Print all printable parts 2. Insert or press in the bearings into the rolls <i>Be careful to only press on the outer ring, pressing on the inner ring could damage the bearings</i> 3. Unmount the standard holder on your i3 Mega S/Pro 4. Insert the holders into the ends of the rolls 5. Push the assembled filament-roller onto the metal plate 6. Remount the standard holder with the filament-roller <br> <h2>Needed material</h2> <strong>3D-printed:</strong> 2x "mount_filament_roller.stl" 2x "roll_filament_roller.stl" <br> <strong>Hardware:</strong> 4x ball bearings: https://amzn.to/3wHBc9g Inner diameter: 5mm Outer diameter: 11mm Width: 4mm <br> <h2>Other Information</h2> Length: 40mm Width: 85mm Height: 30mm <i>The fit of the bearings is pretty tight, a rubber mallet or press could be useful to mount them.</i> <blockquote><strong>Is your 3D-printer too small? Don't own a 3D-Printer? I can help you out! All printed parts are <a href="https://ko-fi.com/kevinsuniverse">available on my Ko-fi!</a></strong></blockquote>
Statistics
Likes
0
Downloads
0