Upgrading PET strip cutting
Description
winder + puller non 3d printed parts ------------------------------------------------ Screws 4mm X 65 mm with nuts X 2 Screws 4 mm X 60 mm with nuts X 2 screws 4 mm X 15 mm with nuts X 12 volt Dc motor body outer diameter 34 mm 8 mm metal rod X 51 mm ( not 3d printed ) 2 X Push buttons 2 X single pole double through ( 5 pin ) relays 12 volts 3 mm X 21 mm metal rod for inforcing spool drive gear 4 X 607 bearings 2 X 608 bearings Cutter non 3D printed parts ------------------------------------- 2 X 6202 bearings, jam them with epoxy after sharpening 4 X 608 bearings. 2 X mk 8 threaded rod length shown in the video with 6 nuts, 1X rod 7 mm or 8 mm, length should be greater than bottle height. 4 X 4 mm X 54 mm nut bolts as required. 3 bearings 607 for bearing body.( for 8.5 mm width) 4 X 15 mm screws with nuts for base fitting 2 X 4mm X 30mm screws with nuts https://youtu.be/Th4tUM3stUo https://youtu.be/skPRLGRRfdI
Statistics
Likes
0
Downloads
1