Simpler Case Feeder for Wombatordnance Case Feeder
Description
Wanted a more secure connection to the motor and simpler re-configure for case size. Hex holes are sized for 6mmx3mm magnets. I only used 1 pair of magnets per "Pocket Filler" and they seem to hold very well. There are 3 pockets per slot so you can make the volume fillers really secure if needed. Set screw holes are for M4 set screws and threaded in the model. I did not need to chase the threads with a tap on my Bambu X1C with a 0.6mm nozzle (0.12 layer height in that area).
Statistics
Likes
0
Downloads
0