Paper Crimper for handmade card booster packs
Description
This is a remix of the paper crimper by jetty as well as the remix of said paper crimper from MarcElbichon. I wanted to make some handmade card boosters but if you only have two gears you will smack the crank into the booster pack and destroy it. I customized the base to fit 3 gears and now you can use the crank without hitting the paper. And I also only wanted to crimp the thin top and bottom part of the booster so I resized the gears and rods that go into them. The gears are now 6.6mm high. You need to print two of gear 1 and one of gear 2. I printed the gears at 10-15mm/s to ensure they turn out nice and even. The base with the paper guide is modified from MarcElbichon, I made space for 3 gears and shortened the guide a little! Original paper crimper by jetty: https://www.thingiverse.com/thing:17634 Paper crimper remix by MarcElbichon: https://www.thingiverse.com/thing:1275107
Statistics
Likes
0
Downloads
0