Makita MakPac Trolley / Rollwagen
Description
I made a trolley for my MakPacs with an easy locking system that attaches to the Makita locking system. To assemble the side latches, carefully push the 2 pieces together. To attach the paracord loops, thread the paracord through the 2 holes and knot the ends together. If you want to TPU sleeves for the paracord loops, print about 85% of the sleeves, push pause, insert the paracord and then finish the print. This way you do not have do fiddle the paracord through the sleeves. If you use pan head screws, you do not need washers. If you want to use countersunk head screws, you can print TPU washers to evenly distribute the pressure on the PLA parts. . . . **For the trolley you need:** 1x 18mm plywood 33 x 47cm 4x heavy duty castors 14x screws 4x16mm 2x paracord 2mm (roughly 12cm long) . . . **Printed parts:** 2x front brakets 2x side latches . . . **Optional printed parts:** 2x TPU sleeves for the paracord loops 14x TPU washers for countersunk head screws (für Senkkopfschrauben) . . . Happy printing! 🙂
Statistics
Likes
0
Downloads
0