Inverted Scales - Lower Pic Rail
Description
Wasn't loving the feel without an AFG on the Inverted scales. No lower Pic rail posed a challenge. So I used the Mlok M3 hardware posted here somewhere, and made a quick wrap-around picatinny rail mount. It's offset down just enough for a CaptainSlug AFG. Use 4x M3x10mm screws, and Nuts with the printed Mlok m3 nuts to attach sides to blaster. Use 2x Countersunk M3x14 screws to connect rail halves. Made a slight adjustment to width as I was about a 1/2mm too wide, added a couple chamfers and a relief so you could actually get a normalish screwdriver in on the pic rail screws.
Statistics
Likes
0
Downloads
0