HD Plex 250W ATX PSU Bracket
Description
I designed this mount to enable the HD Plex 250W PSU to be fitted to any case with an ATX PSU mount. I am hoping to drop the power usage of my home server by about ~10% with this power supply. Going from around 80% to over 90% efficiency. The plug and PSU are mounted to the bracket using the included hardware. All 6 screws are used to spread the load of the power supply across the brackets weaker print lines. The black screws are for the IEC "kettle cord" plug mount. I have supplied holes for mounting in both orientations, depending on what the case uses. Not sure how it would fare without additional support from the case itself. Standard power supply screws can be used for the bracket mounting holes. I did find I had to round off the corners of the print holes for the screws with a blade to encourage initial thread engagement and pretapped the standard psu mount screws with the screws themselves to make installation easier. Also included a mount for an 80mm fan, which may or may not be necessary.
Statistics
Likes
0
Downloads
0