Creality K1 MAX honeycomb style side mounts kit
Description
Created for the creality K1 Max. i used the following settings: Layer height: 0.10 mm infill: 30% Speed: 170 mm/s printing time: 10H 31M 49S Material length: 63.53 m Material weight: 189.482 g the original spool holder can be used in this model. only put some support under the blocks for the coil holder. The original screw cant be used. I used for the screws on the side: Low socket head bolt M3 x 8. And for the screw that is connected to the side fan: Low socket head bolt M3 x 10.
Statistics
Likes
0
Downloads
0