SMALLER Spool adapter for AMS Lite
Description
<h3>Introduction</h3> I accidentally bought 250g spools with an internal diameter of 42mm, Which doesn't fit the AMS rollers as they support 53-58 mm only. The only solution was to design a full replacement of the AMS-Lite compatible Spool roller :) This design is print-in-place, snaps into place like the original rollers using the same mechanism and provides a smooth enough rolling of the spool (I tested it only in PETG wich seems to be “slippery” enough, not sure about PLA). <h3>Demo</h3> <iframe width="560" height="315" src="https://www.youtube.com/embed/yBldBXvj2zQ?si=oX0y0cA6a1wV4sVc" title="YouTube video player" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share" referrerpolicy="strict-origin-when-cross-origin" allowfullscreen></iframe> <h3>Printing details</h3> <b>Printer:</b> A1 mini with AMS <b>Filament:</b> Cheapest PETG I could find (TECOR orange) <b>Walls:</b> 3 <b>Infill:</b> 10% gyroids <b>Supports:</b> none <b>number of plates (A1 mini):</b> All four can fit on one plate, but I choose to print them separately to reduce the impact if there's a failure <b>Print time:</b> around 2.5 hours per roller <h3>Assembly details</h3> See the demo above :) <b>Support me on Patreon! (if you really want to):</b> https://www.patreon.com/Namiiria3DPrints
Statistics
Likes
0
Downloads
1