Clipstick Adapter for Leifheit ClickSystem
Description
I just combined the "Clipstick" from derAaron with the "Leifheit adapter" by JanesW to create a Clipstick that can be used with any Leifheit Click-System stick. The clipstick does not work with all quick-draws, but most of the "generic" ones I tried worked well. I used the following for around 10€: https://www.obi.de/p/1460468/leifheit-teleskopstiel-mit-gelenk-110-cm-190-cm I printed with PETG and low infill. Worked great, but broke after somebody tripped with the stick in hand. Will print it again with higher infill. I used 0.2 resolution, but more coarse should also work. Support should only be necessary touching the buildplate (also to improve adhesion to the plate) and is easy to removed.
Statistics
Likes
0
Downloads
0