JDC AX1800 PRO TOM MOD
Description
这个MOD可用于JDC AX1800PRO路由器。 目前这个MOD包含3个部分，打印完成后组装好即可使用。 组装难度不高，拆完后就是打螺丝。 所需材料： 1. JDC AX1800PRO主板 2. M3*3塑料垫圈（内径3mm，高度3mm) 3. 双面胶（推荐耐高温的胶带） 4. M3*8沉头螺丝，数量8个 测试结果： OPENWRT固件，室温25C，温度在62~65C. --注意：分享STL图纸需要注明出处。 ----------------------------------------------------------------------------------------------------- This MOD can be used with JDC AX1800PRO router. Currently, this MOD contains 3 parts, which can be assembled and used after printing. Assembly is not difficult, just screw in after disassembly. materials needed: 1. JDC AX1800PRO motherboard 2. M3*3 plastic washer (inner diameter 3mm, height 3mm) 3. Double-sided tape (high-temperature resistant tape is recommended) 4. M3*8 countersunk head screws, quantity 8 pcs Test Results: OpenWRT firmware, room temperature is 25C, temperature is 62~65C. --Note: When sharing STL, you need to indicate the source. --------------------------
Statistics
Likes
0
Downloads
0