Notebook Pen Holder
Description
Small pen holder to be glued to the back of a notebook or calendar. Designed for 3mm plywood. The inner hole diameter can be adjusted for the pen size. I've had success setting it to 0.1mm greater than the diameter of the pen. In the included model, It is defaulted to 9.6mm. I cut it on an xTool D1 Pro (20W) which completes the job in about 1 minute 40 seconds. There are two glue joints: one to attach the round pen stand to the base and another to attach the base to the notebook. A guide line is added to the base to assist with alignment with the edge of the notebook. With parts this small, an accelerator really helps to cure the super glue instantly.
Statistics
Likes
0
Downloads
0