Wall hooks for towels by Jaroslav Troščák
Description
Hi, This is my design for towel hooks. Screws: Use wood screws for mounting. Pin Hole: Below the screw hole, there is a 2mm diameter hole for a shelf pin (as shown in the fifth photo) to prevent the hook from moving. Drill a hole for the pin first, and then drill a hole above it for the screw. Placement: The pin hole is positioned 2mm below the center of the hook. To ensure proper alignment, drill the pin hole 2mm below the center of your wooden board. I will also provide a model without the pin hole, allowing you to use only the screw if preferred. If you like this design, you can donate to me at: https://www.paypal.com/paypalme/JaroslavTroscak
Statistics
Likes
0
Downloads
0